信誉第一网投平台-澳门十大网赌信誉平台-登录

推荐产品
  • 压铸模温机 压铸模温机,压铸机专用模温机,使用工作温度高达350℃,采用...
  • 集中供料系统 集中供料系统采用微机集中自动控制,实现了对粒料的24小时连续...
  • 自动吸料机 300G微电脑全自动吸料机产品(又称真空吸料机,自动吸料机,...
  • 水式模温机 水式模温机 企业专业生产模温机,高光模温机,高光注塑模温机...
  • 中央供料配件 中央供料配件-中央控制台 操作界面与运转状态显示面板数字化...
  • 中央供料系统 中央供料系统是为注塑车间的塑料产品生产而设计的,实现了不间断...
  • 塑料干燥机 标塑料干燥机特点:原料接触面为不锈钢设计。 精密压铸的铝制外...
  • 吸粉机 吸粉机原理的详细先容: 真空吸粉机,又称作:气动真空给料机...
  • 低速粉碎机 低速粉碎机系列特点: 1、 慢速塑料破碎机属于无筛网型塑料回...
  • 自动吸料机 自动吸料机:5HP真空自动吸料机产量高;达到时产800公斤输...
产品详情
  • 产品名称:塑料中央供料系统

  • 产品型号:TT-40
  • 产品厂商:天天自动
  • 产品文档:
你添加了1件商品 查看购物车
简单先容:
塑料中央供料系统特点 1、节省人工成本和原料成本,使用年限长达10年以上;塑料中央供料系统设计流程:原料→储存→计量→干燥→输送→使用 塑料中央供料系统采用一台机一根管,密封式回路设计方式,保证整个系统运行稳定,绝无塑胶回潮、
详情先容:
塑料中央供料系统特点
1、节省人工成本和原料成本,使用年限长达10年以上;
2、原料集中管理,避免浪费及污染现象;
3、保持工厂环境整洁,维系环境体系;
4、有利保持品质稳定,提高产值,维系质量体系;
5、有利於提高企业形象,赢得客户好评与合作。
Plastic central feeding system features
1, save labor costs and raw material costs, the use of life for more than 10 years;
2, centralized management of raw materials to avoid waste and pollution;
3, to keep the factory environment clean and maintain the environment system;
4, favorable to maintain quality and stability, increase production value, maintain the quality system;
5, is conducive to improving the companys image, to win customers praise and cooperation.


塑料中央供料系统设计流程:原料→储存→计量→干燥→输送→使用
塑料中央供料系统采用一台机一根管,密封式回路设计方式,保证整个系统运行稳定,绝无塑胶回潮、堵料现象发生。配合中央干燥机(除湿机)系统使用,可使干燥空气对原料进行再次干燥,防止干燥後的塑胶回潮,同时在每个输送循环後对输送管进行清理,确保管道内没有残料。在避免原料回潮的同时也保证加入注塑机中原料一致性,在真空负压同进作用下,原料中原有的粉尘经过过滤器(集尘器)系统滤出,有利提高产品质量。
Plastic central feeding system design process: raw materials → storage → measurement → drying → transport → use
Plastic central feeding system using a machine a tube, sealed circuit design, to ensure the stability of the entire system, no plastic resurgence, blocking material phenomenon occurs. With the central dryer (dehumidifier) system, dry air can be used to dry the raw materials again, to prevent the plastic moisture after drying, while in each conveying cycle after the pipeline to clean up to ensure that there is no residue in the pipeline. In order to avoid the return of raw materials, but also to ensure that the injection molding machine to join the consistency of raw materials in the vacuum negative pressure with the role of the original raw materials through the filter (dust collector) system filter out, favorable to improve product quality.



塑料中央供料系统控制台特点:
增设原料管制画面,监控各成型机所使用原料、吸料、缺料及中央主机(马达)各种异常现象。
Plastic central feeding system console features:
The addition of raw material control screen, the monitoring of the use of raw materials, suction, lack of material and the central host (motor) a variety of anomalies.

采色书面显示各种设定,运转及运转状况;
具备料管抽空清管,自动洗尘集尘中央供料主机A、B交替自动切换及人工选料防错功能;
采用Color display in a variety of settings, operation and operation of the situation;
With a tube to clear the tube, automatic dust collection center for the host A, B alternating automatic switching and artificial selection of material error-proof function;
Using PLC and large size 10.4-inch color man-machine interface touch panel, easy to understand, good operation;
PLC及大尺寸10.4寸彩色人机界面触控面板,简单易懂,好操作;

塑料中央供料系统特点主机特点
1、马达不停止设计,以避免马达启动频繁,造成耗损;
2、附安全释压阀,当主机运动压力过大时,安全设定值过载,释压阀全自动释压以保护马达;
3、供料主机两台A、B交替,并且有自动切换阀门设计,确保原料输送稳定性。
自动逆转旋风集尘器
1、将空气滤清器及旋风集尘器一体设计,以自然离心力高效能收集粉尘;
2、可附高压储气罐,自动清洗过滤器;
3、集尘器装截风阀,可有效在不停机下,移动集尘器粉尘。
Plastic central feeding system features host features
1, the motor does not stop the design, in order to avoid frequent motor start, resulting in wear and tear;
2, with safety relief valve, when the host movement pressure is too large, the safety set value overload, release valve fully release pressure to protect the motor;
3, for the host two A, B alternately, and there are automatic switching valve design to ensure that the stability of raw materials delivery.
Automatic reversal whirlpool dust collector
1, the air filter and cyclone dust collector design, natural centrifugal force to collect dust and high efficiency;
2, can be attached to high pressure gas tank, automatic cleaning filter;
3, dust collector installed wind pump, can be effective in the non-stop, the dust collector dust.
塑料中央供料系统送料站特点
、是由数个分支组合而成,而同一个分岐料管的原料,可供注塑机机台使用,每支都有快速按头保气密性;可提高系统效率,换料方便快捷。
Characteristics of feeding center for plastic central feeding system
, Is a combination of several branches, and the same sub-ore pipe material, for injection molding machine machine use, each have a quick head tightness; can improve system efficiency, easy to change material.
整厂自动化设计,将原料及干燥料筒与现场彻底分开管理,节省空间。
现场作业环境清洁美观,没有热源,提升环境质量,降低人员流动率。
客户参观时有助提升企业整体形象,获得良好印象,从而增加订单。
The whole plant automation design, the raw materials and drying barrels and the scene completely separate management, saving space.
On-site operating environment clean and beautiful, no heat, improve environmental quality, reduce staff turnover rate.
Customers visit to help enhance the overall image of the enterprise, get a good impression, thereby increasing the order.
原料现场
原料集中除湿干燥,可节省用电量及烘料时间。
原料专人负责管理,减少浪费,降低生产成本。
设立原料快速选料站,提高生产效率。
可适用于多种原料之弹性生产模式。
产能及良品率提高且稳定。

Raw material scene
Raw material centralized dehumidification drying, can save electricity and drying time.
Raw materials responsible for management, reduce waste, reduce production costs.
The establishment of raw materials rapid selection of materials, improve production efficiency.
Can be applied to a variety of raw materials, flexible production model.
Production capacity and yield improved and stable.
姓名:
电话:
您的需求:
 

信誉第一网投平台|澳门十大网赌信誉平台

XML 地图 | Sitemap 地图