信誉第一网投平台-澳门十大网赌信誉平台-登录

推荐产品
  • 压铸模温机 压铸模温机,压铸机专用模温机,使用工作温度高达350℃,采用...
  • 集中供料系统 集中供料系统采用微机集中自动控制,实现了对粒料的24小时连续...
  • 自动吸料机 300G微电脑全自动吸料机产品(又称真空吸料机,自动吸料机,...
  • 水式模温机 水式模温机 达安泰企业专业生产模温机,高光模温机,高光注塑...
  • 中央供料配件 中央供料配件-中央控制台 操作界面与运转状态显示面板数字化...
  • 中央供料系统 中央供料系统是为注塑车间的塑料产品生产而设计的,实现了不间断...
  • 塑料干燥机 标塑料干燥机特点:原料接触面为不锈钢设计。 精密压铸的铝制外...
  • 吸粉机 吸粉机原理的详细先容: 真空吸粉机,又称作:气动真空给料机...
  • 低速粉碎机 低速粉碎机系列特点: 1、 慢速塑料破碎机属于无筛网型塑料回...
  • 自动吸料机 自动吸料机:5HP真空自动吸料机产量高;达到时产800公斤输...
产品详情
  • 产品名称:自动液压打包机

  • 产品型号:150吨
  • 产品厂商:天天自动
  • 产品文档:
你添加了1件商品 查看购物车
简单先容:
150吨自动液压打包机配输送带液压打包机主要适用于钢厂、农作物秸秆、回收加工行业及有色、黑色金属冶炼行业。自动液压打包机可将各种金属边角料(钢刨花、废钢、废铝、废铜、废不锈钢以及报废汽车废料等)挤压成长方体、八角形体、圆柱体等各种形状的合格炉料,即可降低运输和冶炼成本,又可提高投炉速度
详情先容:
150吨自动液压打包机配输送带液压打包机主要适用于钢厂、农作物秸秆、回收加工行业及有色、黑色金属冶炼行业。自动液压打包机可将各种金属边角料(钢刨花、废钢、废铝、废铜、废不锈钢以及报废汽车废料等)挤压成长方体、八角形体、圆柱体等各种形状的合格炉料,即可降低运输和冶炼成本,又可提高投炉速度150吨全自动打包机配输送带
自动液压打包机一、机械性能及规格参数:
1.打包尺寸:1100x1300mm
2.自动捆线:5线
3.落料口尺寸:1800x1050x3500mm
4.压缩室体积:长2400X宽1100X高1300mm
5.包块尺寸:(长x宽x高):1400(可调)x1100x1300
6.机器外型尺寸:9700x4150x4600mm
7.包块重量:约800kgs-1000kgs,一个小时出15-20个包块
8.主机两边挡板,底板,顶板用45#槽钢,25mm,加强板20mm,底板加6mm耐磨钢板
9.主油缸筒:Φ351xΦ280mm 长2776mm
10.顶包油缸:Φ273xΦ220mm 1条;Φ219xΦ180mm  2条
11.穿线油缸:Φ103xΦ80mm
12.冷却方式:风冷式冷却器Φ200x800mm
13.机器重:13500kg
14.输送带:2500kg

自动液压打包机二、输送带配置:
1.输送带(长)14000x(宽)1500mm,沉地3500mm
2.输送带电机6极7.5kw,摆线针7号机头,1:59
3.输送带两边用12#槽钢;板厚5mm;A3板构造
4.配全自动润滑油油箱
5.运输带两侧装有紧急控制开关

自动液压打包机三、液压及动力系统:
1.电机:河北电机厂电机4极37kw,双组电机
2.推线顶包电机:4极5.5kw
3.油泵:江苏南通企源4535V75A30
4.冷却系统:水冷
5.压力喉:国产
6.油封配件:日本进口
7.液压油68#抗磨液压油(机器出厂不配液压油)
8.油箱容量:1600kg
9.电磁阀台湾
自动液压打包机四、电器部分:
1.电器正泰电器
2.plc      台湾永宏
3正泰热过载保护器,保护电机系统不会短路和烧坏
4.正泰6000变频器
5.触摸屏控制接触器  触摸屏     威伦
继电器  泰华

自动液压打包机五、机器特点
1.高效能,低噪音,液压系统和电器元件都采用中外配件
2.独特的分散型剪刀设计,提高剪切效能
3.自动高效捆线系统
4.本机设有多个安全网,安全网打开断电不工作
5.出包长度可以自动调节,根据客户要求灵活变动

6.PLC触摸屏控制,容易操作

Hydraulic baler is mainly suitable for steel mills, crop straws, recycling and processing industries and non-ferrous and ferrous metal smelting industries. The hydraulic baler can squeeze various metal scraps (steel shavings, scrap steel, scrap aluminum, scrap copper, scrap stainless steel, and scrap car scrap, etc.) into qualified furnace materials of various shapes such as cuboid, octagon, and cylinder, which can be reduced Transportation and smelting costs can increase the furnace speed
150 tons automatic baler with conveyor belt
1. Mechanical properties and specifications:
1. Packing size: 1100x1300mm
2. Automatic binding line: 5 lines
3. Blanking size: 1800x1050x3500mm
4. Compression chamber volume: length 2400X width 1100X height 1300mm
5. Package size: (length x width x height): 1400 (adjustable) x1100x1300
6. Machine size: 9700x4150x4600mm
7. Pack weight: about 800kgs-1000kgs, 15-20 packs in one hour
8. The baffle on both sides of the host, the bottom plate, the top plate use 45# channel steel, 25mm, the reinforcement plate 20mm, the bottom plate plus 6mm wear-resistant steel plate
9. Main cylinder barrel: Φ351xΦ280mm  length 2776mm
10. Top pack oil cylinder: Φ273xΦ220mm 1; Φ219xΦ180mm 2
11. Threading cylinder: Φ103xΦ80mm
12. Cooling method: air-cooled cooler Φ200x800mm
13. Machine weight: 13500kg
14. Conveyor belt: 2500kg

Second, the conveyor belt configuration:
1. Conveyor belt (length) 14000x (width) 1500mm, sinking ground 3500mm
2. Conveyor motor 6 poles 7.5kw, cycloid needle No. 7 head, 1:59
3. 12# channel steel on both sides of the conveyor belt; plate thickness 5mm; A3 plate structure
4. With automatic lubricating oil tank
5. Emergency control switches are installed on both sides of the conveyor belt

3. Hydraulic and power system:
1. Motor: Hebei Motor Factory 4 pole 37kw motor, dual-group motor
2. Push line top package motor: 4 pole 5.5kw
3. Oil pump: Jiangsu Nantong Qiyuan 4535V75A30
4. Cooling system: water cooling
5. Pressure throat: domestic
6. Oil seal accessories: imported from Japan
7. Hydraulic oil 68# anti-wear hydraulic oil (the machine is not equipped with hydraulic oil)
8. Fuel tank capacity: 1600kg
9. Solenoid valve Taiwan
4. Electrical part:
1. Electrical Appliances
2.plc Taiwan Yonghong
3 Chint thermal overload protector to protect the motor system from short circuit and burnout
4. CHINT 6000 inverter
5. Touch screen control contactor
Relay Taihua

Five, machine characteristics
1. High efficiency, low noise, hydraulic system and electrical components are used in Chinese and foreign accessories
2. Unique decentralized scissors design, improve cutting efficiency
3. Automatic and efficient binding system
4. The machine is equipped with multiple safety nets, which will not work when the safety net is turned off
5. The length of the package can be adjusted automatically, and it can be flexibly changed according to customer requirements
6. PLC touch screen control, easy to operate

姓名:
电话:
您的需求:
 

信誉第一网投平台|澳门十大网赌信誉平台

XML 地图 | Sitemap 地图